Operation manual for belt lamination machine

Belt lamination machine is suitable for men and women belt, shoulder after wearing plastic laminating, and four joint, can make the belt molding effect is better, better fit.

Safety Precautions

1.  Before turn on the machine for production, please do read the manual book carefully, and if any damage to the machine as the wrongly operation, we will not take responsibility.

2. The voltage of the machine should match AC 220V. 

3. The maintenance work and modification of the machine must be done by the professional technicians.

4. The machine works through the main shaft driving the belt moving forward. And the two wheels running and pressing tightly together then makes the belts coupling together. So when operation the machine, operator must be very carefully, avoid the fingers into the wheels to cause any injures.  

5. When the machine is running normal and smoothly, do make sure never let other unrelated objects or hard items into the coupling area or wheeling area to avoid the potential risk of the damage to the machine or accidents. 

Operating instructions

1. After opening the package of the machine, pls use one piece of soft cloth to clean the surface of it , and check the screws, if any one loose after the long transportation,if any screw missing, and manually check if the machine can run smoothly.

2. Loose the screw--030049, and take down the washer--030049, and according the need then fix the different mould, and then fix the washer 030049, and lock the screw 030049. and if change the plastic roller the procedure is same.

3. Adjustment of the mould wheels and plastic wheels

According to the thickness of the leather, adjust the hand wheel --030032, if the leather is thick, then twist the wheel anti-clockwise direct, and if the leather is thin, twist the wheels to the clockwise direction.